manualshive.com logo in svg

Banner PICO-AMP MD14BB6, Руководство пользователя

Поделиться
Скачать
Banner PICO-AMP MD14BB6 Скачать руководство пользователя страница 1

PICO-AMP Miniature Remote Sensing System

PICO-AMP

™

Miniature Remote Sensing System

MD14 Modulated Amplifer and Ultra-small Remote Sensors

*NOTE: 9 m (30') cables are available by adding suffix “W/30” to the model number

of the cabled sensor (e.g., MD14BB6 W/30)

PICO-AMP MD14 Amplifier Models

PICO-AMP Features

•

Ultra-small remote sensors to fit the tightest locations

•

Three fixed frequency selections or Auto Frequency mode to prevent crosstalk in
multiple-sensor applications

•

Amplifier clips to 35 mm DIN rail for easy mounting

•

Diffuse- or opposed-mode sensors are available

•

Opposed-mode sensors are sold in pairs

•

Opposed-mode range is 300 mm; diffuse-mode range is 50 mm

•

Amplifiers and sensors are sold separately

•

Yellow indicator on emitter signals when light is sensed; Yellow indicator on
amplifier signals light sensed and flashes to indicate marginal excess gain
(between 1.0 and 1.5x)

•

An excellent option for wafer handling applications, small parts sensing and
pharmaceuticals applications

MD14BB6

MD14BB6Q

Models

Sensor

Compatibility

Cable

Supply

Voltage

SP3ER1
SP3ER2
SP8ER1
SP8ER2
SP3D1

2 m (6.5')

4-pin Pico-style QD

10-30V dc

Output Type

Bipolar,
NPN/PNP

WARNING . . .

Not a Safety Device

These remote sensors and component amplifiers do NOT include the self-checking redundant circuitry necessary to allow
their use in personnel safety applications. A sensor or amplifier failure or malfunction can result in either an energized or a 
de-energized amplifier output condition.

Never use these products as sensing devices for personnel protection. Their use as a safety device may create an unsafe condition which
could lead to serious injury or death.

Only MICRO-SCREEN

™

, MINI-SCREEN

®

, MULTI-SCREEN

®

, MACHINE-GUARD

™

and PERIMETER-GUARD

™

Systems, and other systems so

designated, are designed to meet OSHA and ANSI machine safety standards for point-of-operation guarding devices. No other Banner
sensors or controls are designed to meet these standards, and they must NOT be used as sensing devices for personnel protection.

!

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Содержание PICO-AMP MD14BB6









Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды