Banner L-GAGE LTF12, Инструкция по эксплуатации

Страница: 18 / 49

June 22, 2023
LTF Time Of Flight Laser Distance Sensor With IO-Link Instruction Manual
18
Remote Input Instructions
Action Result
Navigate: MENU › Dx_OUT › Tch2Pt › TchSPt1
OR
Navigate: MENU › Dx_OUT › Tch2Pt › TchSPt2
The selected TEACH mode and "Teaching"
display while the sensor is being taught.
TEACH Accepted
The new value is shown on the second line
of the display and flashes before it is saved
and the sensor returns to the parent menu.
TEACH Not Accepted
" FAIL" and a warning message display, and
the sensor returns to the parent menu.
Repeat steps 1 to 2 for the other switch point, if desired.
3.
Access the TEACH mode.
Action Result
Single-pulse the remote input.
T
"RMT TCH " and the current switch point val-
ue displays.
1.
Present the target.
Action Result
Present the switch point one target.
"RMT TCH" and the target's measurement
value display.
2.
TEACH the sensor.
Action Result
Double-pulse the remote input.
T T
T
"TchSPt1 Teaching " displays while the sen-
sor is being taught.
TEACH Accepted
The new value displays on the second line
of the display, flashes, and the sensor goes
to "TchSPt2" and the current measurement
value.
TEACH Not Accepted
" FAIL" flashes, the sensor returns to step 2,
and "RMT TCH " displays.
3.
Present the target.
Action Result
Present the switch point two target.
"TchSPt2" and the target's measurement
value display.
4.
TEACH the sensor. 5.
© Banner Engineering Corp.