May 22, 2023
EZ-SCREEN SLS Safety Light Curtain Instruction Manual
53
•
•
•
•
•
•
Chapter Contents
6.2 System Configuration Settings
6.6 Periodic Checkout Requirements
Certain procedures for installing, maintaining, and operating the
EZ-SCREEN SLS
must be performed by either Designated
Persons or Qualified Persons.
A
Designated Person
is identified and designated in writing, by the employer, as being appropriately trained and qualified to
perform system resets and the specified checkout procedures on the
EZ-SCREEN SLS
. The Designated Person is empow-
ered to:
Perform manual resets and hold possession of the reset key (see
Perform the Daily Checkout Procedure
A
Qualified Person, by possession of a recognized degree or certificate of professional training, or by extensive knowledge,
training, and experience, has successfully demonstrated the ability to solve problems relating to the installation of the
EZ-
SCREEN SLS
System and its integration with the guarded machine. In addition to everything for which the Designated Per-
son is empowered, the Qualified Person is empowered to:
Install the
EZ-SCREEN SLS
System
Perform all checkout procedures
Make changes to the internal configuration settings
Reset the System following a Lockout condition
Set the System settings using the configuration panels located on each sensor, behind the access cover. The access cover is
opened by first removing the factory-installed security plate with the security hex wrench provided. Re-install the security
plate after any configuration changes.
Operating Instructions
Chapter 6
Security Protocol
6.1
System Configuration Settings
6.2
© Banner Engineering Corp.
Содержание EZ-SCREEN SLS
