3. Position the base plate on the bottom of the Q45VA so that the four counterbores face up and the alignment mark faces
the front of the Q45VA. Align the counterbores with the holes at the bottom of the device.
4. Securely attach the base plate using the four Phillips head screws.
5. Apply Loctite to the center screw hole of the base plate. Secure the set screw into the center hole until it reaches
resistance.
6. Fasten the disc on the set screw, with the threaded side facing away from the Q45VA.
Q45VA Bracket Assembly Quick Start Guide
2
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 208986 Rev. B
