Banner American BA-EZ27, Руководство по эксплуатации

Страница: 6 / 10

INITIAL SETUP
Unpacking and assembly...
Before unpacking the unit, inspect the shipping container for signs of damage.
Notify the carrier and your dealer immediately if any damage is noted.
CAUTION!
The laminator, without the feed table
and mounting slides installed, weighs approxi-
mately 70 lbs. Use two people when removing the
laminator from the shipping container.
First unpack and identify the following items:
• EZ27 Roll Laminator
• Feed Table with Paper Guide
• Mounting Slides for Feed Table (with screws)
Assemble the Feed Table:
Before you can begin using your laminator, you will have to assemble the Feed
Table and Guides on the laminator. To do this, you will need a #2 Phillips screw-
driver.
1. Place the laminator on a sturdy table or stand with clear access to both side
panels.
2. Place one Feed Table Slide on the left side plate and attach the Slide with two
#8-32 x ½ screws.
3. Mount the second Slide to the right side plate using two #8-32 x ½ screws.
Components...
The figure below shows the location of the major components and controls of the
EZ27. You should become familiar with these before operating the laminator.
4
16 627601 Laminating & Pull Roll Spur Gear 2
17 600602 Roller Sprocket, front, 22 tooth
18 600603 Roller Sprocket, rear, 21 tooth
19 600601 Motor Gear
20 327007 Rubber Rollers, top 2
21 327006 Rubber Rollers, bottom 2
22 700613 Spacer Washers 2/assy
23 600401 Bearing, Roller 8/assy
24 627119 Roller Cover 2
25 627108 Tie Bar
26 500304 Terminal Block, 6 position
28 Motor Drive Assembly 1
700680 Mounting Washers 4
127001 Motor, Standard 1
100005 Motor, 90V DC, Variable Speed 1
127002 Motor, 220V 1
627126 Motor Support Bracket
700454 Mounting Screws 4
29 500002 Capacitor, 7.5 μ f
30 627104 Motor Cover
31 627306 Cover Plate
32 Fuse Assembly
500401 Fuse Holder
500512 Fuse, 10A, 220V
500516 Fuse, 15A, 120V (UL)
500513 Fuse, 12A, 120V (CSA)
33 500204 Power Cord 1
227607 Strain Relief Bushing
34 200002 Side Cover, Right 1
35 200001 Side Cover, Left 1
36 200606 Rubber Feet 4
37 500601 Indicator Lamp 2
38 500701 Heater Power Switch 1
39 500706 Machine Drive Switch 1
40 500703 Reverse Drive Switch 1
41 227107 Safety Shield 1
Zippy Cutter 1
13