P
RODUCT
D
ATA
S
HEET
B
ANLAW
S
ECURE
F
ILL
D
RY
B
REAK
A
UTO
ID
W
IRELESS
S
WIVEL
BRT
33
WSMA
,
BRT
34
WSMA
Doc ID: PRH-FMG-76 Version: 1.0
Page 1 of 14
Please ensure you have the latest version of this document.
Thank you for purchasing this high quality Banlaw product. Please read through and understand
the information in this Product Data Sheet (PDS) BEFORE installation or operation of the product
to avoid potential health, safety and environment (HS&E) risks or property damage.
figure 1 Banlaw SecureFill Dry Break Auto ID Wireless Swivel (BRT34WSA)
1
PRODUCT DESCRIPTION
The Banlaw SecureFill Dry-Break Auto ID Wireless Swivel, hereafter referred to as the Wireless Swivel,
represents an innovative evolution of the Banlaw Dry Break “Auto ID” system. The use of wireless
technology provides the same fuel security as the wired FuelTrack Dry-Break Auto ID system with up
to twice the range of the wired Auto ID system.
The Wireless Swivel acts as a conventional swivel and an interface to the ID tag in the attached receiver. The
tag ID is communicated from the Wireless Swivel to the ResTrack System via the Wireless Controller HID. The
use of contact-based identification greatly improves reliability while maintaining security. The Wireless
Swivel is only compatible with Banlaw Auto ID Nozzles, Receivers, and the ResTrack Resource Management
System.
The Wireless Swivel is screwed into the nozzle and provides a rotating mechanical connection between the
hose and the nozzle. The Wireless Swivel detects the ID tag in the receiver and communicates the unique Tag
ID to the ResTrack System via the wireless gateway. The Contact-based identification between the swivel and
the Auto ID receiver greatly improves reliability and security and is fully compatible with previous generation
Banlaw Auto ID nozzles.
The Electronics module (BRTWSMA) on the swivel assembly can be replaced when necessary. The Wireless
Swivel is designed for Ultra-low power consumption for extended battery life.
Two LED’s (green & red) on
the Wireless Swivel communicate system status to the operator.
The Wireless swivel is compliant with design requirements for Explosive Atmospheres (Hazardous Zones -
ATEX).
