2
97670 v.2
This owner’s manual is a supplement
to the main iDash 1.8 owner’s manual
(PN 97654)
. This manual covers
wiring up the iDash 1.8 to aftermarket
ECUs and configuring the ECU to
communicate to the iDash. Please
reference the main iDash owner’s
manual for all other iDash instructions.
Supported ECUs
Holley:
ECUs that support “Racepak
Dashboard” CAN configuration
Edelbrock:
Pro Flo 4
Motec:
M1
Motec:
M400, M600, M800, M880, M84
Haltech:
All CAN Bus Equipped
Haltech ECUs
AEM:
Infinity EMS (30-71XX), AEM V2
& EMS-4 (30-6XXX)
Link:
All Link G4+ ECUs
Megasquirt:
MS2, MS3, MSPNP,
MS3pro, MS3Pro PNP
Emtron:
ECUs with CAN output
ECU Master:
EMU Series
ProEFI:
Pro48, Pro128
Hondata:
KPRO V4, S300 V3
MaxxECU:
ECUs with CAN output
...More coming soon!
If your ECU is not supported
please email Banks Power to request
support for your ECU.
Table of Contents
Section 1:
Wiring
............................................3
Section 2:
iDash configuration
..................... 5
Section 3:
ECU configuration
........................ 5
3.1: Haltech .................................. 5
3.2: Motec M400, M600, M800 ... 6
3.3: Motec M1 ................................
3.4: Motec for M84 ...................... 7
3.5: AEM ....................................... 8
3.6: Megasquirt ............................ 9
3.7: Holley .................................. 10
3.8: Link G4 ................................ 11
3.9: Edelbrock ............................. 12
3.10: Hondata Kpro .................... 13
3.11: Hondata S300 ................... 13
3.12: MaxxECU ........................... 14
Section 4:
Troubleshooting
......................... 15
Introduction
