AV Album™ & Player
(11)
This is a translation based on the Chinese version User Guide, subject to its originality.
All rights reserved 2005, Lucas Industries Limited
Copy feature for backup
Method A:
1.
Insert memory card into respective card slot of this AV Album™ & Player, the unit
2.
Press “Power On/Off” (No. 8 button in the physical structure) for more than 0.5 second to
switch on the unit
3.
Press “Copy” (No. 9 button in the physical structure), the “Copy” LED (No. 4 LED in the
physical structure) will blink
4.
When the “Copy” LED diminishes, copying process is finished. Hard disk LED (No. 3
LED in the physical structure) will light on, to represent the copying is successful.
5.
Take out the memory, press again the “Power On/Off” to switch off the unit.
Method B;
1.
Connect this AV Album™ & Player, the unit with AV cord (Accompanied accessories No. 6)
with TV or projector or any screen display device, plug in with the International Power
Adapter (Accompanied accessories No. 4)
2.
Insert memory card into respective card
3.
Press “Power On/Off” (No. 8 button in the physical structure) for more than 0.5 second to
switch on the unit. Using Remote Control (Accompanied accessories No. 2) to select the
buttons the
Arrow signs (<left, >right) as indicated No. 19 buttons in the previous
paragraph Remote Control, until the screen display the “COPY “ and highlight (red frame)
the intended respective memory card pending copying
4.
Press the “Copy” button (button No. 16 in the previous paragraph of Remote Control) to
execute the copying process. The TV screen will show the capacity informative data of
both the memory card and the hard disk
5.
When the TV screen hints whether “COPY is required?”, press the “ENTER” button (No.
20 button in the previous paragraph of Remote Control) to confirm execution until screen
shows the copying is successful
6.
Take out the memory card, press “Power Off” on the Remote Control (No. 3 button in the
previous paragraph of Remote Control), to switch off the unit
AV Album™ & Player
(12)
This is a translation based on the Chinese version User Guide, subject to its originality.
All rights reserved 2005, Lucas Industries Limited
Exchange of contents
The correlating feature with computer
1.
To connect this AV Album™ & Player, the unit with any computer using the USB cord
(Accompanied accessories No. 5)
2.
Press “Power On/Off” (No. 8 button in the physical structure) for more than 0.5 second to
switch on the unit
3.
The computer screen will indicate there are 3 new external drives, do any drag and drop or
transfer of contents like usual computing habit
4.
When jobs completed, proceed the ‘Safely remove the external drive’ by stopping and
closing them in ‘My Computer’ or at the right bottom corner of the task bar. Disconnect the
USB cord from the unit, it will automatically switch off
5.
If your operating system is Win98 or Win98Sec, please use the provided Software Disc
(Accompanied accessories No. 3) to install the driver before using this feature. Win2000,
XP and Mac can work straight without
Viewing photo/video
1.
Connect the unit with AV cord (Accompanied accessories No. 6) with TV or projector
or any screen display device, plug in with the International Power Adapter
(Accompanied accessories No. 4)
2.
Switch on the TV or projector or respective screen display device, select the AV mode
Press “Power On/Off” button (No. 8 button) in the physical structure, for more than
0.5 second, to switch on the unit.
A) Entering into Selection of Card mode:
Setting the TV from NTSC or PAL system by pressing the NTSC/PAL button (No. button
14 on the Remote Control), the screen will show the diagram as follows. If not sure with
the pre-recorded contents, you can always switch this button to choose the best view result
later when it is playing.
By selecting the respective card, press the “ENTER’ button on the Remote Control
(No. 20 button in the previous paragraph of Remote Control)
