MANUAL
6.2 Securing the child car seat with vehicle’s belt.
The car seat must be used vehicle’s 3-point belt system for children of the age
groups II + III (15kg-36kg). The harness system must be removed from the
seat (see point 5.1) When used for these age groups II + III (15kg-36kg).
Step1. Thread the crescent clasp (with
belt) into the highest slot which one is
near to car belt automatic roll-up device.
Pull the clasp from back side of child seat
to it’s face side. (Fig. 1)
Step2. Place the child safety seat on the
vehicle’s seat ensuring it is firmly pressed
against the car seat’s backrest. Seat your
child in the child car seat (Fig. 2).
Step3. Pull out the 3-point vehicle belt
and place the lap belt on the opposite
side of the buckle under the arm rest.
(Make sure that the diagonal belt and
the lap belt on the buckle side are under
the armrest).
Group II + III ( 15~36 kg): The adult belt
must pass through the top hook!
The lap strap should be worn low down,
so that the pelvis is firmly engaged and
the straps should not be twiste
And allow it to the buckle in place. You
will hear “click” (Fig. 3).
fig.1
fig.3
fig.2
