Bang & Olufsen UG4, Руководство пользователя

Страница: 8 / 24

Introducing DVD 1
In this chapter, you will find
instructions explaining how to gain
access to DVD 1 functions via the
close-up operation panel on the front
of DVD 1 and via the Beo4 remote
control.
The close-up operation panel allows
you to load and unload discs, to start,
pause or stop playback, to cue
forward or backward on a disc or to
view the elapsed playing time.
To load a disc…
> Press EJECT on the close-up operation panel.
The loader slides out.
> Place a disc in the loader. For information about
valid disc formats, refer to ‘Play other disc formats’
on page 11.
> Press the DVD button on Beo4 or PLAY on the
close-up operation panel to close the loader and
start playback.
You can load a disc for playback at a later time.
Press EJECT from stand-by mode, place a disc in the
loader, and press EJECT again. DVD 1 will remain
in stand-by mode.
The close-up operation panel
EJECT
Press to open or close the loader.
Press to cue backward or forward during
playback.
PLAY
Press to start playback. Press again to pause playback
at the current still picture or audio track.
• (Stand-by)
Press to switch DVD 1 to stand-by mode. Stops
playback without switching to standby if pressed
during playback or pause mode.
DISPLAY
The display to the right shows the elapsed playing
time of a DVD or the current track number being
played on an audio CD. Switching DVD chapters
causes the appropriate chapter number to be
shown in the display for a few seconds.
EJECT PLAY
8