Bang & Olufsen UG4, Руководство пользователя

Страница: 7 / 24

Set up DVD 1 with your particular
television…
This procedure will ensure that your DVDs are
played with the proper picture format,
regardless of the type of television you have.
DVD 1 must be switched on before you
perform this ‘once only’ operation.
Press LIST on Beo4 until V.SETUP*
appears in the Beo4 display
Press GO to display TUNE
Press 1 if your DVD 1 is connected
directly to a television from the
BeoVision MX-series (i.e. 4000/
4002, 6000/7000)
Press 2 if your DVD 1 is connected
to a BeoVision MX via an AV2
Expander box, or if it is
connected to any other Bang &
Olufsen television
Press GO to store the setup
*Add V.SETUP to Beo4…
Before you can set up DVD 1 to the correct television
type, you must add one ‘button’ to the Beo4 remote
control; V.SETUP is needed to set up DVD 1.
> Hold the • button while pressing LIST .
> Now, let go of both buttons.
> Press LIST until ADD? appears in the display.
> Press GO to call up the list of ‘buttons’ to add
from.
> Press LIST until V.SETUP is displayed.
> Press GO to add the ‘button’. ADDED appears
in the Beo4 display and you leave the setup
function.
You only need the V.SETUP ‘button’ once and can
therefore remove it after setting up DVD 1, if you
wish. This is done by repeating the procedure
described above, selecting REMOVE? instead of
ADD?.
LIST
V.SETUP
GO
TUNE
1
2
GO
7