Setting up Playmaker - iOS device 7
WLAN setup - Auto
> Connect the mains cable from the product to the mains supply.
> Press the
Easy wireless setup
button on the Playmaker.
> Press the
WPS
button on the router or activate the function from the routers web interface
Wi-Fi PROTECTED
SETUP
.
3GDMDSVNQJHMCHB@SNQ×@RGDRFQDDMVGHKDRD@QBGHMFSGDMDSVNQJ6GDM/K@XL@JDQ@MCSGDQNTSDQ@QDBNMMDBSDCSGDMDSVNQJHMCHB@SNQADBNLDRRNKHCVGHSD
WLAN setup
> Connect the mains cable from Playmaker to the mains supply and wait approximately two
LHMTSDRENQSGDOQNCTBSSNFDMDQ@SD@M@BBDRRONHMS3GDMDSVNQJHMCHB@SNQ×@RGDR
orange when ready.
> Connect the iOS device to the new access point
Playmaker_AP.
> Start the app
BeoSetup
. The application will now locate and show a list of Bang &
Olufsens products connected to the network.
> Select the product - the product name is shown as
Playmaker_xxxxxxxx
('x' = serial
number).
Now the setup page for the product is shown (illustrated to the right):
> Click on the drop-down list for Network name (SSID) and choose the desired network. If
necessary, press the
Refresh list...
to perform a new network scan.
> Press the
Password
area to enter the passphrase for the wireless network.
> Press the
APPLY CHANGES
button to save settings.
,@MT@KBNMÖFTQ@SHNM
Static IP address (DHCP disabled) ...
(ESGDQNTSDQHRBNMÖFTQDCVHSG#'"/CHR@AKDCSGD/K@XL@JDQLTRSADRDSTOVHSG@RS@SHB(/@CCQDRR
> Choose
SHOW ADVANCED SETTINGS
to open the section for manual IP settings (illustrated
to the right
)
.
> Remove the checkmark for
Use DHCP
SGDÖDKCRENQL@MT@K(/RDSSHMFRADBNLDR@BSHUD
%HKKHMSGDÖDKCRENQ(/RDSSHMFRL@QJDCVHSG
*
@BBNQCHMFSNSGDQNTSDQBNMÖFTQ@SHNM
> If a proxy server is needed, checkmark
Use proxy server
@MCÖKKHMSGDQDPTHQDCÖDKCR
*
.
> Press the
APPLY CHANGES
button to save settings.