For the US and Canadian
markets only!
CAUTION: This equipment has
been tested and found to comply
with the limits for a class B digital
device, pursuant to part 15 of the
FCC Rules. These limits are
designed to provide reasonable
protection against harmful
interference in a residential
installation.
Operation is subject to the
following two conditions:
1 This device may not cause
harmful interference, and
2 This device must accept any
interference received, including
interference that may cause
undesired operation
Warning: Changes or modifications
made to this equipment not
expressly approved by Bang &
Olufsen may void the FCC
authorization to operate this
equipment.
This equipment generates, uses
and can radiate radio frequency
energy and, if not installed and
used in accordance with the
instructions, may cause harmful
interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular
installation. If this equipment does
cause harmful interference to radio
or television reception, which can
be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between
the equipment and receiver.
– Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
– Consult the retailer or an
experienced radio/TV technician
for help.
The radiated output power of
Bang & Olufsen Earset 2 is far
below the FCC radio frequency
exposure limits. Nevertheless, the
Bang & Olufsen Earset 2 shall be
used in such a manner that the
potential for human body contact
during normal operation is
minimized.
For the Canadian market only!
This class B digital apparatus meets
all requirements of the Canadian
Interference-Causing Equipment
Regulations and with RSS-210 of
Industry Canada.
CAUTION: To prevent electric
shock, do not use the polarized
plug, attached to this apparatus,
with an extension cord, receptacle
or other outlet unless the blades
can be fully inserted to prevent
blade exposure.
NOTICE: The Industry Canada label
identifies certified equipment. This
certification means that the
equipment meets
telecommunications network
protective, operational and safety
requirements as prescribed in the
appropriate Terminal Equipment
Technical Requirements
document(s). The Department
does not guarantee the equipment
will operate to the user’s
satisfaction.
>> English
12
3507554 UG01 EarSet 2 Global_MULTI.indd 12
27-03-2006 15:33:23
