If your television has been disconnected from
the mains for more than approximately 15
minutes, the television prompts you for the
pincode when you switch it on. You may not be
able to switch the television on immediately –
wait approximately 30 seconds and try again.
IMPORTANT! If you are prompted for a pincode
the first time you switch on your television,
contact your Bang & Olufsen retailer.
When your television is switched on …
> Press and enter the code digits using the
number buttons. (Beo4: Use the number
buttons).
> Press the
centre
button when the last digit is
entered. (Beo4: Press
GO
).
> Your television starts up again.
Five incorrect entries will cause the television to
shut down for three hours, during which operation
is not possible. Disconnecting the television resets
the three-hour period.
If you have forgotten your pincode …
> Contact a Bang & Olufsen retailer to receive a
five-digit mastercode.
> When the television prompts you for your
pincode, press and hold to bring up the
MASTERCODE menu.
> Press , enter the code digits using the number
buttons and press the
centre
button to
deactivate your pincode and reactivate your
television. (Beo4: Use the number buttons and
press
GO
).
To use the pincode system again …
> Follow the procedure for activating the pincode
system.
Enter the pincode
PINCODE
next
accept
GO
PINCODE
0
. . .
MASTERCODE
next
accept
GO
MASTERCODE
0
. . . .
19
NOTE! Should you lose or forget your code,
contact your Bang & Olufsen retailer. Your retailer
can provide you with a mastercode, which disables
your pincode.
Содержание BeoVision 9
Страница 1: ...BeoVision 9 Guide...
Страница 22: ......
Страница 23: ......
Страница 24: ...www bang olufsen com...