Bang & Olufsen BeoVision 6, Справочник, Страница: 37 / 60

37
SMARTCARD
For insertion of a card for access to digital channels.
CA
For insertion of a card and module for access to
digital satellite channels.
The CA module has one protruding edge on one
side and two protruding edges on the other side.
The side with two edges should face upwards.
When inserting a card the gold chip should face
away from the screen.
For further information about compatible card
and module combinations, contact your Bang &
Olufsen retailer.
IMPORTANT! DVB DATA (the USB port) is for
service use only.
MASTER LINK
Socket for connection of a compatible Bang &
Olufsen music system.
The socket is also used for BeoLink distribution of
sound throughout the house.
POWER LINK
For connection of external Bang & Olufsen loud-
speakers. Only used if your television is not
equipped with the optional surround sound
module.
IR out 1-3, 2-4
For controlling a connected set-top box.
VGA
For connection of a PC. Supports the following
resolutions: 60 Hz; 640 x 480,800 x 600,
1024 x 768, 1360 x 768 and 1280 x 720. For
further information on use and placement, refer
to pages 12 and 39.
The speaker and digital sockets mentioned
below are only available, if your television is
equipped with the optional surround sound
module.
REAR
The two sockets are used for connecting the
external rear speakers in a surround sound setup.
FRONT
The two sockets are used for connecting the
external front speakers in a surround sound setup.
SUBWOOFER
Socket used for connecting a BeoLab subwoofer
in a surround sound setup.
A1 – A2
For digital sound input from external equipment
connected to an AV socket group.
Smart Card reader and CA module
CA MODULE
DVB DATA
SMARTCARD
If you have connected HD equipment to your
television, some video functions are affected:
– If you have selected FORMAT 2 for letter-box
pictures as described on page 9 in the Guide,
you cannot scroll the picture up or down
– You cannot distribute sound or picture from
a HD source to a product in a link room,
unless your HD equipment also provides a
Standard Definition (SD) signal
– You cannot record an HD source, unless your
HD equipment also provides a Standard
Definition (SD) signal.