Bang & Olufsen BeoVision 6, Справочник, Страница: 12 / 60

12
Use your television as a computer monitor
You can connect your television to a
computer and use it as a monitor.
IMPORTANT! If you wish to connect a computer
to the television and use the television as a
monitor, make sure that the television, the
computer, and all equipment connected to the
computer are all disconnected from the mains
before you connect the computer and the
television to each other. In addition, the
computer must be connected to a grounded
wall outlet as specified in the computer’s
setting-up instructions.
To see the computer picture on the television
screen, you must bring it up with Beo4.
Connect the computer’s VGA output to the VGA
input on the tele vision. To hear sound from the
computer in the tele vision loud speakers, connect
the sound output to the AV3 R – L sockets on the
tele vision.
To bring up the computer picture …
Press repeatedly until PC appears
in the Beo4 display
Press to bring up the picture
You can then operate the
computer as you normally would.
The television supports the
following screen resolutions:
60 Hz; 640 × 480, 800 × 600,
1024 × 768, 1360 × 768.
If a source such as a PC is connected via the VGA
socket, the following picture options appear:
BRIGHTNESS … Adjusts the picture brightness.
CONTRAST … Adjusts the contrast level in the
picture.
COLOUR … Adjusts the colour intensity in the
picture.
HOR. SIZE … Adjusts the width of the picture.
HOR. POSITION … Adjusts the position of the
picture horizontally.
VERT. POSITION … Adjusts the position of the
picture vertically.
Note that the last three settings only apply for the
screen resolution in effect at the time you adjust
the settings. For further information on the
PICTURE menu, refer to the chapter ‘Adjust
picture and sound settings’ on page 28.
Bring up the computer image on the screen
LIST
PC
GO
VGA
R – L
(AV3)
HDTV SETUP
BRIGHTNESS 32
CONTRAST 32
COLOUR 32
HOR. SIZE 0
HOR. POSITION 0
VERT. POSITION 0