2.15
Adjust Tuner takeover, IF adjust and FM sound adjust
- The values (A) written on the label placed on PCB1, have to be written into the
EEPROM (6IC6) (see
➢
5).
- Enter SETUP, select SERVICEMODE with
STOP, STOP, GO
. Press the button
combination within 3 seconds. Highlight TV-TUNER, select with
GO
. Change the
settings by means of
l
and
n
until they match the values on the label. Then press
GO
to store the settings.
Exit Service Mode
Finish the on-site service
- If a non-customer VTR has been used V.TAPE must be set to NONE. Select OPTIONS
in SETUP. Select CONNECTIONS and set V.TAPE to NONE. Press
DISPLAY
to exit
SETUP.
- See
#7 Check after replacement of main chassis or modules
, for fi nishing the
on-site service.
Adjustments, English
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK
