Bang & Olufsen BEOSOUND 9000, Руководство по установке

Страница: 4 / 16

4
P L A C E M E N T
■
If you are going to hang the
BeoSound 9000 on the wall,
always use the correct size and
type of screws and wall plugs
to support the weight of the
BeoSound 9000 (depending on
the material and the construc-
tion of the wall).
If in doubt, consult your Bang
& Olufsen dealer.
■
Light partition wall are often
constructed of gypsum panels
– known as drywall or wall
board – secured to vertical
studs. Gypsum is not a satis-
factory material to support the
weight of the BeoSound 9000!
If you wish to hang your Beo-
Sound 9000 on a gypsum wall,
using one of the brackets, we
recommend that at least one
mounting screw be a lag screw,
which is screwed securely into
a vertical wall stud.
■
When hanging the BeoSound
9000 on the wall (as shown in
figs 2, 3, and 7) we recommend
that you conceal the cables
using the optional Cable Cover
type 2062.
This cable cover has an overall
length of 75 cm (29½"). The
folder enclosed with the cable
cover describes how and where
to fasten it in relation to the
different wall brackets.
As you can see, we have used
two cable covers in fig. 2, and
one in figs 3 and 7, respectively.
When mounted correctly this
ensures that the BeoSound
9000 is hung at the optimal
height for easy access to the CD
compartments. The two
different heights also takes the
As illustrated in this section
(figs 1 – 7) the BeoSound 9000
is designed for a variety of
placements. Its compactness
facilitates placement next to
your favourite listening position,
which is also optimal for close-
up operation of the system. It
can be placed on a special stand,
on a shelf or a table in various
positions – or hanging off the
wall (using one of the optional
wall brackets).
■
At the end of this section is
described how to centre the CD
mechanism for the different
setup situations mentioned
here –
this is very important
for the functioning of the CD
player!
■
In the section “Ready for
use…” is described how to turn
the close-up operation panel
(and the display) so it can be
read from your preferred angle.
■
The BeoSound 9000 is
designed for use in dry
environments only, and for use
within a temperature range
of 10 – 40° C (50 – 105° F).
■
Avoid placing the BeoSound
9000 in direct sunlight or direct
artificial light (e.g. a spotlight),
or near objects generating
electrical noise (e.g. dimmers),
as this will reduce the sensitivity
of the remote control receiver.
■
Place the BeoSound 9000 so
that ventilation will not be
impeded, and remember to
leave enough space above or
in front of the BeoSound 9000
for the glass door to open, and
to facilitate close-up operation.
Fig. 1: The BeoSound 9000
placed in a vertical position
using the Stand type 2055.
When placed like this, the CD
mechanism must be centered
for a vertical position.
The Stand is supplied with two
different sets of feet:
– spikes for use on a carpeted
floor
– rubber feet for use on a non-
carpeted floor
Do not lift or move the Stand
around while the BeoSound
9000 is mounted.