Bang & Olufsen BeoSound 3000 Скачать руководство пользователя

Страница: 7 / 31

You can use your BeoSound 3000 in

a stand-alone setup or connected to

a Bang & Olufsen video system using

the Master Link cable. The Master

Link socket on the back of BeoSound

3000 can also be used for BeoLink

distribution. The BeoLink system

allows you to listen to the BeoSound

3000 in any room you like, via extra

speakers*.

Use the diagram and the graphics

imprinted on the socket panel for

reference, when locating the sockets.

Please do not connect the BeoSound

to the mains until you have finished

the setting-up procedure.

Connect the cables

*NOTE! Please contact a Bang & Olufsen retailer

for further information on the BeoLink system

and information on auxiliary equipment.

AM aerial

FM aerial

Mains supply

Aerial

Connect your FM aerial to the socket marked

FM and your AM aerial, if any, to the socket

marked AM.

When using an AM loop aerial, tune in to the

radio station you want, then turn the aerial

horisontally until you receive the best possible

signal.

Loudspeakers

Connect your active speakers to the sockets

marked POWER LINK.

You may choose to loop the signals through

from speaker to speaker, please refer to the

User’s guide for your BeoLab loudspeakers, or

you may connect one speaker to each of the

two sockets.

Remember to set the L • R • LINE switch on

the BeoLab speakers to L and R (left and

right), respectively.

Note: If you wish to connect the BeoLab 2500

loudspeakers, please refer to the guide supplied

with the speakers

Auxiliary equipment

Connect your auxiliary equipment to the

socket marked AUX. This socket enables you

to use compatible Bang & Olufsen equipment,

e.g. an audio tape recorder or a record player.

The socket may also accommodate equipment

of other makes.

BeoLink connection

The socket marked MASTER LINK should be

used when you connect your BeoSound 3000

and a compatible Bang & Olufsen video

system.

Mains supply

Plug the mains lead into the socket marked

but do not switch on at the mains yet.

Loudspeakers

BeoLink Connection

Auxiliary
equipment

Содержание BeoSound 3000
































Результаты поиска

Содержание BeoSound 3000

Отзывы:

Похожие инструкции для BeoSound 3000

Бренды по названию

Популярные бренды

Bang & Olufsen BeoSound 3000, Справочник

Результаты поиска

Содержание BeoSound 3000

Отзывы:

Похожие инструкции для BeoSound 3000

Бренды по названию

Популярные бренды