Bang & Olufsen Beosound 2000, Руководство пользователя

Страница: 5 / 12

5
P L A C E M E N T
Your BeoSound 2000 can be placed standing in its base
on the floor, or on a shelf or a table – or, hanging on
the wall, using the wall bracket (optional accessory –
type no. 2088). See the section “Optional Accessories”
on how to install the wall bracket.
Light reflected off large objects placed too close to
BeoSound 2000’s left side may prevent the glass door
from closing. Therefore, test the door function on your
BeoSound 2000 before you e.g. drill holes in the wall for
a wall bracket.
The slim cabinet allows placement in confined spaces.
Avoid placing your system in direct sunlight, near
radiators or other sources of heat. Place the system so
that ventilation will not be impeded.
Base
The base supplied is designed, and must be used, to
support the BeoSound 2000 when it is placed standing
up.
Standing without its base, your BeoSound 2000 will
not be stable enough to secure safe operation!
B
C
Leave a space of 5 cm (2")
above or to the sides of the
system in order to allow
sufficient ventilation.
To attach the base:
Place the BeoSound 2000 music
system lying on its rear side on
e.g. a table, and then:
B Insert the two front pegs on
the base into the correspond-
ing holes in the bottom plate
of the system.
C Move the rear part of the
base towards the system, so
that the rear pegs engage the
notches in the rear edge of
the bottom plate.