background image

NOTE: This equipment has been tested and found 
to comply with the limits for a class B digital 
device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable 
protection against harmful interference in a 
residential installation.

This equipment generates, uses and can radiate 
radio frequency energy and, if not installed 
and used in accordance with the instructions, 
may cause harmful interference to radio 
communications. However, there is no guarantee 
that interference will not occur in a particular 
installation. If this equipment does cause harmful 
interference to radio or television reception, which 
can be determined by turning the equipment off 
and on, the user is encouraged to try to correct 
the interference by one or more of the following 
measures:

–  Reorient or relocate the receiving antenna
–  Increase the separation between the equipment 

and receiver

–  Connect the equipment into an outlet on a 

circuit different from that to which the receiver is 
connected

–  Consult the retailer or an experienced radio/TV 

technician for help

This class B digital apparatus meets all 
requirements of the Canadian Interference-Causing 
Equipment Regulations.

This product fulfils the conditions stated in the EEU 
directives 89/336 and 73/23.

The black and yellow label on the compact disc 
player serves as a warning that the apparatus 
contains a laser system and is classified as a class 1 
laser product. In case any difficulties arise with 
the compact disc player, please contact a Bang & 
Olufsen retailer. The apparatus must be opened by 
qualified service personnel only.

CAUTION: The use of any controls, adjustments or 
procedures other than those specified herein may 
result in hazardous radiation exposure.

23

CLASS 1

LASER PRODUCT

Содержание BeoSound 1

























Отзывы: