Bang & Olufsen BeoLink Wireless 1, Руководство пользователя

Страница: 14 / 20

‘IR-eye’ – cable connections
The small circular ‘IR-eye’ is
available from a Bang & Olufsen
retailer. An ‘IR-eye’ must be used
in each link room with a Power
Link setup. Use the cable supplied
with the ‘IR-eye’ and connect it as
explained here:
> Cut the cable to the required
length (from the receiver to the
‘IR-eye’) and strip it as shown.
> Insert the cable end through the
cable clamp (A) and connect the
leads to the terminals inside the
‘IR-eye’ in the order indicated.
Then tighten the clamp
(A)
.
> Attach the rear cover and fix the
‘IR-eye’ to the wall as explained on
the next page – and then plug the
cable into the socket marked IR
on the receiver.
Connect the leads in the cable to the
terminals inside the receiver in this
order:
1 = Yellow
2 = Grey
3 = Green
4 = White
5 = Brown
Strip the cable end. Twist the cores
in each lead and bend them back.
>> Set up BeoLink Wireless 1
35 mm –
1.5"
5 mm – 0.25"
1
2
3
4
5
A
14