Set up BeoLink Gateway - Interfaces - B&O products
42
B&O products
For A/V products there are some
basic options and a source list
that can be presented to the user.
- Select a product in the left
column.
NetworkLink product: area/zone/product
- In the
NetworkLink product:
area/zone/product
display-part,
the following meta-data are
shown:
(With Master Link products:
NetworkLink is replaced by
MasterLink in the above
heading).
-
Name
: Possible to rename the
product.
-
Address
: The serial number of
the product.
-
MLN
: An unique integer in the
range 1 to 240. Used by the
BeoLink App and external
controllers to identify the B&O products on the BeoLink Gateway.
Beo4 remote control
-
√
Beo4 navigation button
: With
√
= Beo4 type 171x and = Beo4 type 162x by which the product is operated.
Product sources
For each product sources can be added, when relevant. By this the connected sources are made available to the user. For local and distributed
sources on Network Link products it can be queried directly from the product by pressing the
Synchronize sources with product
button.
The information provided in the
Product source
display-part for each source is the following:
-
Source
: Actual button to press (IR command) for selecting the source.
Note: Source texts/names varies depending on the remote control used. Beo4 sources are in the top part of the list, and scroll down the list to
finde BeoRemote One texts/names.