background image

Cautions! 

–  Make sure that the loudspeaker 

is placed and connected in 
accordance with the instructions 
in this Guide. 

–  Do not attempt to open the loud-

speaker. Leave such operations 
to qualified service personnel! 

–  The loudspeaker is designed for 

indoor use in dry, domestic 
environments only, and for use 
within a temperature range of 

10–40º C (50–105º F). 

–  In order not to block the sound 

emitting from the rear bass reflex 
ports and the bass units on the 
bottom, leave a minimum of 
6 cm (2½") free space behind and 
below the loudspeaker. 

–  Always place the loudspeaker in 

a horizontal position, and do not 
place any items on it. 

– 

Prolonged listening at high 
volume levels may cause hearing 

damage!

 

WARNING:

 To prevent fire or electric 

shock, do not expose this appliance to 
rain or moisture. Do not expose this 
equipment to dripping or splashing 

and ensure that no objects filled with 
liquids, such as vases, are placed on 

the equipment. 

To completely disconnect this equip-

ment from the AC Mains, disconnect 

the power supply cord plug from the 
AC receptacle. 

This symbol indicates that a 

dangerous voltage constituting 

a risk of electric shock is pres-

ent within this unit.

This symbol indicates that there 

are important operating and 
maintenance instructions in the 
literature accompanying this 
unit.  

CAUTION: To reduce the risk of 

electric shock, do not remove 
cover (or back).
No User-serviceable parts inside. 
Refer servicing to qualified 

service personnel. 

Содержание BeoLab 7-1













Отзывы: