Bang & Olufsen BeoLab 1, Руководство пользователя

Страница: 5 / 12

5
Assemble the column and base plate
To prevent the column from being
scratched, we recommend that you
do not remove the foamy wrapping
completely. Just un-wrap it at the
bottom-end of the column to get
access to the screw holes, socket
panel, etc.
Due to the weight of the base
plate, it is packed in a separate box.
Open the box with the base plate,
find the bag with the screws and
the Allen key, then assemble the
column and base plate as
illustrated.
Assembly: While the BeoLab is still lying on
the packaging, lift it up at the base-end and
place an extra piece of packaging material
underneath.
Fix the base plate into place. The groove for the
cables must point downwards (A) , and the base
plate guiding pin will engage the corresponding
hole in bottom part of the column. Fasten the
base with the six screws provided.
Rubber feet adjustment: To compensate for an
uneven floor surface the BeoLab 1 base plate
has been fitted with six adjustable rubber feet
(indicated by the little arrows).
Adjust if appropriate, but wait until you have
raised and placed the loudspeaker.
A
BeoLab 1 front