9
Installation
The amplifier has two different mounting options: a) in a standard 19” A/V rack
and b) on a solid flat surface.
Rack mount
Detachable rack ears are included with the product for mounting in a standard
19” rack. Please see the illustrations below for rack possibilities. A single amplifier
can be mounted using a regular short rack ear in one side and a long rack ear in
the other side. Two amplifiers can also be mounted side by side by mounting them
with a stabilizer between them.
Rack Possibilities:
1. One amplifier mounted with one short rack ear and one long rack ear:
Figure 1
2. Two amplifiers mounted together with a centre bracket underneath and with
two short rack ears:
Figure 2
Surface mount
The detachable rack ears can also be used for mounting the amplifier on a flat
surface, for example a wall or a ceiling. In this case, the rack ears are mounted in a
different set of holes in the amplifier chassis (see figure 3). Four rubber feet are
also included if the amplifier is placed on a flat surface
Be sure to keep a minimum of 2 inches of clearance above the amplifier to ensure
proper air ventilation for the holes in the top of the cabinet.
Caution: All speaker wire connections must be made with the amplifier off. The
amplifier must be off whenever you make changes to the input connections.
3. One amplifier mounted with two top mounted rack ears:
Figure 3
