![Bang & Olufsen BeoAmp 2 Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/bang-and-olufsen/beoamp-2/beoamp-2_installation-manual_3692632005.webp)
5
General
Number of channels
2 channels
Typical output power
150 W per Ch., 8 Ω (1%THD+N, f=1 kHz), @ 230 Vac
Signal sense
Audio input sense (Only on left channel) (Turns off after 13 minutes without
a signal)
External 12V trigger
Power Link trigger
Standby power consumption
Less than 0.5 W
Audio
THD + N
0.005%, 4 Ω, f=100 Hz, Po=1 W
0.004%, 8 Ω
Dynamic range
113 dBA
Idle noise
75 µV, A-weighted, 20 Hz-20 kHz
Upper bandwidth, -3 dB
55 kHz, 4 Ω
70 kHz, 8 Ω
Frequency response
±0.5 dB, 20 Hz- 20 kHz, all loads
Input impedance
47 KΩ, f=1 kHz
Output serial impedance
12 mΩ, f=1 kHz
Gain
Input level for maximum output volume:
Min gain = No output
Mid gain = 6.5Vrms input gives max output (Power Link input)
Max gain = 1Vrms input gives max output (Line input)
AC Mains Power
AC mains power
Universal Mains 85 - 264 Vac, 45-65 Hz
Power connection
IEC 320 C18 power connector
Thermal
Environmental operating temperature
0° - 60° C / 32° - 140° F
Construction
Height
42 mm/1.65 inches
Width
200 mm/7.87 inches
Depth
250 mm/9.84 inches
Weight
1.95 kg - 4.3 lb
Specifications