Aurora One Rev 1.0
7
2.1
Manual Controlled Gain
The Aurora One’s preamp gain can be manually selected using the “Gain” and “Bypass” toggle
switches located on the front of the unit. The “Gain” and “Bypass” switches each have 3 positions.
Gain Toggle Switch:
Down:
Low Gain Mode (forced)
Middle:
Pre-programmed control is selected
Up: High Gain Mode (forced)
Bypass Toggle Switch:
Down:
Bypass Off (forced) - Gain mode always selected
Middle:
Pre-programmed control is selected
Up:
Bypass On (forced) - Bypass always on regardless of gain setting
Note:
It is important to remember that the Bypass switch automatically takes priority over
the gain switches. With Bypass mode forced on, the gain selection is ignored. This is due to
the fact that Bypass mode has 0dB of gain. The gain selection is therefore irrelevant.