Bandwidth Audio Aurora One, Руководство пользователя, Страница: 12 / 20

Aurora One Rev 1.0
12
Bypass switches set “On” :
The input programmed to this mode will automatically go into Bypass mode when this input is
selected by the front panel.
Note: It is important to remember that the Bypass switch automatically takes priority over
the gain switches. With Bypass mode on, the gain selection is ignored. This is due to the
fact that Bypass mode has 0dB of gain. The gain selection is therefore irrelevant.
For example, if input 2 is set to
Bypass “On” and input 2 is also set to “Low Gain”, the Aurora One
will automatically go into Bypass mode regardless of the gain setting whenever input 2 is selected,
Bypass switches set
“Off” :
The input programmed to this mode will automatically go into “Low” or “High” Gain, depending on
the Gain switch setting, when this input is selected by the front panel.
Gain switches set “ Low ” :
The input programmed to this mode will automatically go into Low Gain, when this input is
selected by the front panel.
Bypass must also be set to Off to take effect.
Gain switches set “ High ” :
The input programmed to this mode will automatically go into High Gain, when this input is
selected by the front panel.
Bypass must also be set to Off to take effect.