14
Smart Pro, Smart & Secure
installation instructions
14. Auto-Close & Accessories
WARNING! It is compulsory to have
Safety Beams installed when using
Auto-Close mode.
14.1 Auto-Close
Auto-Close mode is a function that automatically closes the door after a pre-set time. Safety beams must be installed
in order to run the Auto-Close function. There are two types of Auto-Close available:
Parameter
Value options = Indicated by brightness
of main light
1
2
3
4
5
6
PE AUTO-CLOSE
x2
OFF
15sec
30sec
60sec
90sec
-
AUTO-CLOSE
x3
OFF
15sec
30sec
60sec
90sec
120sec
i. Standard auto-close - the door will Auto-Close after a programmed time. In this mode the timer starts to
countdown as soon as the door is fully open. This function is useful in case the safety beam does not get
triggered.
NOTE:
Auto-Close will not function if the door reversed after hitting an obstruction or stalling.
ii. Safety Beam triggered auto-close - the door will auto-close after a programmed time. In this mode the timer
starts counting down only when the safety beam is triggered. ie car leaving the garage.
S T E P O N E
S T E P T W O
Remove controls
cover
till gear LED
flashing
Press
repeatedly
T O E N A B L E T H E A U T O - C L O S E F U N C T I O N
until gear LED
flashes
x 2 PE Auto
x 3 Std Auto
S T E P F O U R
S T E P T H R E E
Press to enter
parameter
Default setting for
Auto-Close is OFF.
Press to move through
options as per table
Press to save
OR
Press to leave
unchanged
Press
repeatedly
S T E P O N E
S T E P T W O
Remove controls
cover
till gear LED
flashing
Press
repeatedly
T O E N A B L E T H E A U T O - C L O S E F U N C T I O N
until gear LED
flashes
x 2 PE Auto
x 3 Std Auto
S T E P F O U R
S T E P T H R E E
Press to enter
parameter
Default setting for
Auto-Close is OFF.
Press to move through
options as per table
Press to save
OR
Press to leave
unchanged
Press
repeatedly
