Ericsson Internal
DIRECTIONS FOR USE
5 (11)
Prepared (also subject responsible if other)
No.
EUS/WR/EA Dilip Garapaty
1553 - HSM 901 3219 UEN
Approved
Checked
Date
Rev
Reference
EUS/WR/EA [Stacy Scott]
2014-11-17
A
4.3
Remote Access to K530S
If no local access to the K530S and no connection via ERDM either, one
can connect to it remotely if the ‘remote management’ is enabled.
http://<K530S-IP-Address>:8080
To enable remote management, connect to the K530S from the ERDM.
Go to advanced view, then select ‘retrieve all device settings’ from drop
down.
Once that completes, select ‘settings for entire parameter list’ from drop
down. Then scroll down to parameters grouped under X_0026FA_RF.
Under that, there is a group called ‘RemoteAccess’ with two parameters:
enable & port
Change the parameter value by putting a new value in the ‘override’
column. Then highlight that parameter row, and select ‘send marked
setting’ from drop down.
This will update the device with new parameter value.
Template: D1713
