B&R VICPAS C70 Series, Руководство пользователя

Страница: 20 / 108

Device description • Power Panel C70 - 5.7" display
20 Power Panel C70 User's manual V1.30
Model number 4PPC70.0573-20W 4PPC70.0573-20B 4PPC70.057L-20W 4PPC70.057L-20B
Interfaces
Interface IF1
Fieldbus POWERLINK V2 managing or controlled node
Type Type 4
4)
Variant 1x RJ45 shielded
Line length Max. 100 m between 2 nodes (segment length)
Max. transfer rate 100 Mbit/s
Transfer
Physical layer 100BASE-TX
Half-duplex Yes
Full-duplex POWERLINK mode: No / Ethernet mode: Yes
Autonegotiation Yes
Auto-MDI / MDIX Yes
Interface IF2
Type Ethernet
Variant 1x RJ45 shielded
Line length Max. 100 m between 2 nodes (segment length)
Max. transfer rate 10/100 Mbit/s
Transfer
Physical layer 10BASE-T/100BASE-TX
Half-duplex Yes
Full-duplex Yes
Autonegotiation Yes
Auto-MDI / MDIX Yes
Interface IF3
Type USB 2.0
Variant Type A
Current-carrying capacity 0.49 A
Interface IF4
Type USB 2.0
Variant Type A
Current-carrying capacity ≥Rev. E0: 0.20 A
<Rev. E0: 0.10 A
Interface IF5
Fieldbus X2X Link master
Electrical properties
Nominal voltage 24 VDC -15% / +20%
Max. power consumption
5)
14.4 W
Reverse polarity protection Yes
Electrical isolation IF1, IF2 and IF5 with each other, with other interfaces and with the base device
Operating conditions
Permissible mounting orientations
Standard mounting orientation Vertical
Tilt ±25°
Rotation In 90° increments (portrait/landscape)
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 Front: IP65, Back: IP20
Ambient conditions
Temperature
Operation 0 to 50°C
Storage -20 to 70°C
Transport -20 to 70°C
Relative humidity See temperature/humidity diagram.
Mechanical properties
Note Order terminal blocks 1x 0TB5104.2110-01, 1x 0TB6102.2010-01 and 1x 0TB6102.2110-01 separately
Front
Design Aluminum white pinstripe Anthracite gray pinstripe Aluminum white pinstripe Anthracite gray pinstripe
Dimensions
Width 172 mm 140 mm
Height 140 mm 172 mm
Depth 51 mm
Weight 0.6 kg
Table 5: Power Panel C70 - 5.7" variants without fieldbus interfaces - Technical data
1) The real-time clock is buffered for approx. 1000 hours @ 25°C by a gold foil capacitor. The gold foil capacitor is completely charged after 3 continuous
hours of operation.
2) The size of the memory used for remanent variables is adjustable in Automation Studio.
3) Value applies at an ambient temperature of 25°C. Reducing the brightness by 50% can increase the half-brightness time up to 50%.
4) See section "Communication ⇒ POWERLINK ⇒ General information ⇒ Hardware - IF/LS" of Automation Help
5) Measured while all communication interfaces in use.