![B&R PC 1200 Скачать руководство пользователя страница 48](http://html1.mh-extra.com/html/bandr/pc-1200/pc-1200_user-manual_3089057048.webp)
Installation and wiring
5.2 Installation for mounting with retaining clips
For easy and gentle installation of the PPC1200, it should be inserted into the installation cutout with the bottom
side first at an angle of approx. 10° (1).
If the CFast cover is entirely in the installation housing or control cabinet, the PPC1200 can be placed completely
in the installation cutout (2).
5.2.1 Installing with retaining clips
Figure: Retaining clips
The retaining clips are designed for a certain thickness of the material
to be clamped (max. 6 mm, min. 2 mm).
A large flat-blade screwdriver is needed to tighten and loosen the screw.
The device must be installed on a flat, clean and burr-free surface since
tightening screws on an uneven area can result in damage to the display
or the ingress of dust and water.
See also:
"Requirements for the installation cutout" on page 46
.
48
Panel PC 1200 panel mount device User's manual V1.08