Maintenance / Service • Installing a slide-in compact adapter
Chapter 7
Maintenance / Service
Automation PC 810 with GM45 CPU board user's manual V1.28
379
5 Installing a slide-in compact adapter
Slide-in compact adapters can be installed and exchanged in system units with 2, 3 or 5 card slots. A slide-in
compact drive (e.g. slide-in compact HDD) can be installed in a slide-in slot using the slide-in compact adapter.
5.1 Procedure
1. Disconnect the power supply to the B&R Industrial PC.
2. Touch the housing or ground connection in order to discharge any electrostatic charge from your body.
3. Remove the dummy slide-in module or slide-in drive by unscrewing the two ¼ turn screws.
Loosen the two ¼ turn screws
Loosen the two ¼ turn screws
Figure 224: Loosening the ¼ turn screws
4. Insert the slide-in compact adapter and tighten the two ¼ turn screws.
Figure 225: Installing the slide-in compact adapter
5. Once the adapter has been installed, the slide-in compact drive can be inserted.
