B&R 500 Series, Руководство пользователя

Страница: 13 / 253

General information • Safety notices
Chapter 1
General information
Power Panel 500 User's Manual V 1.00 13
2 Safety notices
2.1 Intended use
Programmable logic controllers (PLCs), operating and monitoring devices (industrial PCs, Pow-
er Panels, Mobile Panels, etc.), and B&R uninterruptible power supplies have been designed,
developed, and manufactured for conventional use in industry. They were not designed, de-
veloped, and manufactured for any use involving serious risks or hazards that could lead to
death, injury, serious physical damage, or loss of any kind without the implementation of ex-
ceptionally stringent safety precautions. In particular, such risks and hazards include the use
of these devices to monitor nuclear reactions in nuclear power plants, as well as flight control
systems, flight safety, the control of mass transit systems, medical life support systems and
the control of weapons systems.
2.2 Protection against electrostatic discharge
Electrical components that are vulnerable to electrostatic discharge (ESD) must be handled
accordingly.
2.2.1 Packaging
• Electrical components with a housing
do not require special ESD packaging, but must be handled properly (see "Electrical
components with housing").
• Electrical components without housing
must be protected by ESD-suitable packaging.
2.2.2 Guidelines for proper ESD- handling
Electrical components with housing
• Do not touch the connector contacts on connected cables.
• Do not touch the contact tips on the circuit boards.
Electrical components with housing
The following is valid in addition to "Electrical components with housing"
• Any persons handling electrical components or devices that will be installed in the
electrical components must be grounded.
• Components can only be touched on the small sides or on the front plate.
• Components should always be stored in a suitable medium (ESD packaging, conduc-
tive foam, etc.). Metallic surfaces are not suitable storage surfaces!
• Electrostatic discharges should be avoided on the components (e.g. through charged
plastics).
• A minimum distance of 10 cm must be kept from monitors and TV sets.