6
NMLM1000
Safety information
Getting
Started . . .
7. Plan your work schedule to spread any high vibration tool
use across a longer period of time.
8. When servicing the blades be aware that, even though the
power source is switched off, the blades can still be moved.
9. Replace worn or damaged parts for safety. Use only genuine
replacement parts and accessories.
Recommendation for class II products
The product should be supplied via a residual current device
(RCD) with a tripping current of not more than 30 mA.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the
time of operation, use low-vibration and low-noise operating
modes as well as wear personal protective equipment.
Take the following points into account to minimize the vibration
and noise exposure risks:
1. Only use the product as intended by its design and these
instructions.
2. Ensure that the product is in good condition and well
maintained.
3. Use correct cutting device for the product and ensure they
in good condition.
4.
Keep tight grip on the handles/gripping surface.
5. Maintain this product in accordance with these instructions
and keep it well lubricated (where appropriate).
6. Plan your work schedule to spread any high vibration tool
use across a longer period of time.
