4
NMLM1000
Safety information
Getting
Started . . .
3. Before using, always visually inspect to see that the blade,
blade bolt and the blade assembly are not worn or damaged.
Replace worn or damaged components in sets to preserve
balance. Replace damaged or unreadable labels.
4. Before use check the supply and extension cord for signs
of damage or aging. If the cord becomes damaged during
use, disconnect the cord from the supply immediately. DO
NOT TOUCH THE CORD BEFORE DISCONNECTING THE
SUPPLY. Do not use the product if the cord is damaged or
worn.
Operation
1.
Operate the product only in daylight or in good artificial light.
2. Avoid operating the product in wet grass.
3. Always be sure of your footing on slopes.
4. Walk, never run.
5. Mow across the face of slopes, never up and down.
6. Exercise extreme caution when changing direction on slopes.
7. Do not mow excessively steep slopes.
8. Use extreme caution when reversing or pulling the product
towards you.
9. Stop the blade(s) if the product has to be tilted for
transportation when crossing surfaces other than grass,
and when transporting the product to and from the area to
be used.
10. Never operate the product with defective guards or shields,
or without safety devices, for example deflectors and/or
grass collector, in place.
11. Do not tilt the machine when switching on the motor, except
if the machine has to be tilted for starting. In this case, do
not tilt it more than absolutely necessary and lift only the
part, which is away from the operator.