How to use the SETUP menu
Update the calibration formula
Write updated data from the SD card to the machine.
❸
Use the
button to select.
Use the
SETUP
button to decide.
❹
Software overwrite complete.
If “NO”, go directly to move to the previous screen.
If “YES”, overwrite (update).
（Overwrite complete!）
Use the
SETUP
button to move to the previous
screen.
❷
Select “belt data set” on the SETUP
screen.
❶
Set the SD card containing update
data to the machine.
Use the
button to select.
Use the
button to move to the next screen.
Use the
button to select.
Use the
button to move to the next screen.
Display the load value
Display the load value not reflecting the calibration formula.
❶
Use the
button to select
“self check”.
❷
Use the
button to select Use
the
SETUP
button to decide.
❸
Actual load value
If “NO”, go directly to move to the previous screen.
If “YES”, display the actual load value.
※ It is not the tension value of the belt but the actual
load value applied to the force sensor.
Use the
SETUP
button to move to the previous
screen.
—SETUP—
3. time setting
4. data backup
5. save data
6. all data delete
7. self check
8. belt data set
9. mode
3. time setting
4. data backup
5. save data
6. all data delete
7. self check
8. belt data set
9. mode
—belt data set—
Get belt data set
from SD
YES NO
YES NO
—belt data set—
Overwrite complete!
—SETUP—
2. target tension
3. time setting
4. data backup
5. save data
6. all data delete
7. self check
8. belt data set
9. mode
2. target tension
3. time setting
4. data backup
5. save data
6. all data delete
7. self check
8. belt data set
9. mode
—self check—
86
N
—self check—
Self check
YES NO
YES NO
36
37
日
本語
ENGLISHENGLISH
中文
