6
INSTRUCTIONS FOR USE
STEP 1:
Place the appliance on a stable and dry surface. Plug the cord into a suitable
power outlet.
STEP 2:
Once switched on at the power mains, the indicator light will illuminate signalling
that the appliance is heating up, when the optimum temperature has been reached, the indica-
tor light will go off and the product is ready to use.
STEP 3:
Carefully lift the cover by the handle and spray both cooking surfaces with
a little cooking spray.
STEP 4:
Pour mixture onto the cooking surface. To avoid spillages, slowly pour a small
amount of the mixture into the centre of the plate and wait for it to evenly distribute
before adding any more. Close the cover.
STEP 5:
Once the ingredients are cooked to your preference, carefully open the lid by the
handle and remove it from the cooking surface with a heat resistant plastic or wooden
utensil. If you are cooking more than one batch in a session, allow the appliance to heat
up before starting the next batch.
STEP 6:
supply. Leave the lid open and allow it to cool.
NOTE:
coated cooking plates before starting to cook.
NOTE:
The heat indicator light will cycle on and off to signal that it is maintaining temperature.
CAUTION:
Exercise caution during cooking, the appliance will emit steam. Please use an
oven mitt when operating the appliance for safety.
HINTS AND TIPS
1.
Do not over mix the batter, as this could result in dense snacks. Mix the batter until
all of the large lumps are gone.
snacks from forming properly.
bag to make the process easier.
