6
Mounting
To ensure device is securely mounted,
4 screws can be applied as shown in
figure below. Choose a location to
mount the device such that good
ventilation and easy power supply
present.
Avoid mounting the device
near a spot subject to extreme heat,
such as engine room or exposed to
direct sunlight.
Stable Power supply
Consider below two types of voltage supply problems in a vehicle for
stable power supply.
Brown-out voltage problem
The spark plug would draw significant stream of instantaneous
electrical power from the car battery when starting the engine.
Therefore the voltage supplied to other electrical equipment drops
significantly lower than its normal level.
Transient voltage problem
(sometimes called spikes)
The significantly changed positive or negative voltage may be
caused by interference from the electrical-mechanical components
in the vehicle, or even from additional electrical equipment
connected to the vehicle’s electrical power system. Without
treatment, sharp spikes are a potential threat to K530S as well
as other electrical equipment on the vehicle.
