p. 26 - Technical failure output [Okout]
An abnormal setting is valid for more than 3 hours. This setting is shown on the front led
‘Failure’ which will be blinking fast.
A few examples:
- Through the software forced outputs [Xout], [Okout] or [Tmpout]
- Eventual invalid settings
- Fog ejection blocked because of.
- Red jumper not connected.
- Through software in ‘System control’ screen
R
, see p. 24.
- Through the “Control Box” switch
- Wrong or invalid HY-3 pack (e.g. : Demo HY-3 pack in a regular device).
- Tamper contact of the side hatch is bridged through the control box switch and/or
through software (
R
HY-3 pack screen).
As soon as the internal failure is restored, the failure report will automatically disappear and
the normal situation returns: [OKout] active (
COM
and
NO
closed).
A common application for this handy [OKout] output is to connect it to a programmable input
of the controlling alarm system or auto dialer. This way it’s very easy to report to a control
room, by means of a phone dialer or an other communication system, the
BANDIT
might have
an eventual problem.
-
H
Y
3
BANDIT
240
PB
v.
408
