Edit favorite pages
1.
Select the edit icon in the Favorite panel:
- Select the X icon on a favorite icon to remove the page
- Select the tool icon on a favorite icon to display the page editor dialog
2.
Add or remove panels in the page editor dialog
3.
Save or discard your changes to leave the favorite edit mode.
Setting the appearance of the Instrument bar
Data sources connected to the system can be viewed in the Instrument bar.
You can configure the Instrument bar to display either one or two bars. If you specify to
display two bars you can set it to alternate the bars automatically. You can specify the
information displayed in the instrument bars.
You can turn the Instrument bar off from the
System controls
dialog.
Ú
Note:
This only turns the Instrument bar off for the current page.
Turning the Instrument bar on/off
1.
Activate the
System controls
dialog
2.
Deactivate/activate the instrument bar icon to toggle the bar on and off.
Edit the content of the Instrument bar
1.
Activate the Instrument bar by selecting it
2.
Select the
MENU
button to open the menu
3.
Select
Edit
to change an instrument gauge followed by the gauge you want to change
4.
Select the content you want to display from the Choose Data dialog
Ú
Note:
You can configure Bar 1 for the active page or for all pages except those that have
a local configuration. Bar 2 can only be configured for the active page.
5.
Select
Menu
and then
Finish editing
to save your changes.
22
Customizing your system
| Zeus3 Operator Manual
Содержание Zeus3 Glass Helm
Страница 1: ...ENGLISH Zeus3 Operator Manual www bandg com ...
Страница 2: ......
Страница 140: ... 988 11377 001 0980 ...