B&G ZEUS S, Руководство по установке, Страница: 9 / 20

9
Panel mounting
Refer to the separate mounting template for panel mounting instructions.
U-bracket mounting
1 Place the bracket in the desired mounting location. Ensure the chosen location has enough
height to accommodate the unit, and allows the unit to be tilted. Adequate space is also
required on both sides to allow tightening and loosening of the knobs.
2
Mark the screw locations using the bracket as a template, and drill pilot holes.
3
Screw down the bracket using fasteners suitable for the material you are mounting the bracket
on.
4
Mount the unit to the bracket using the knobs. Hand tighten only.
¼
Note: The screws shown below are for illustration purposes only. Use fasteners that are suitable
for the mounting surface.