B&G ZEUS S, Руководство по установке, Страница: 14 / 20

14
USB port
The 9” and 12” display units have a USB-A port that can be used to connect a:
• Storage device or
• Card reader
¼
Note: USB devices should be standard PC-compatible hardware.
Ethernet
The Ethernet port(s) can be used for transfer of data and synchronization of user-created data. It
is recommended that each device in the system is connected to the Ethernet network. No special
setup is required for establishing an Ethernet network.
Ethernet connector details
Unit socket (female)
1
2
3
4
5
1
Transmit positive TX+
2
Transmit negative TX-
3 Receive positive RX+
4
Receive negative RX-
5
Shield
Ethernet expansion device
Connection of network devices can be made via an Ethernet expansion device. Additional
expansion devices can be added to provide the required number of ports.
Echosounder
Supports:
• Sonar / CHIRP Sonar
• DownScan
• SideScan
• Active Imaging/Active Imaging HD/Active Imaging 3-in-1/TotalScan/StructureScan
¼
Note:
A 7-pin transducer cable can be connected to a 9-pin port using a 7-pin to 9-pin
adaptor cable. However, if the transducer has a paddle wheel speed sensor, the water-speed
data will not display on the unit.
Connector details
Unit socket (female)
6
7
9
1
3
4
5
2
8
1 Drain/ground
2
Not used
3
Not used
4 Transducer -
5
Tran
6 Not used
7
Not used
8
Temp +
9 Transducer ID