B&G Vulcan Series, Инструкция по эксплуатации

Страница: 40 / 68

B
A
B
A
• To show the depth from the lowest point of the vessel to the
bottom, set the offset equal to the vertical distance between the
transducer and the lowest part of the vessel,
A
(negative value).
• To show the depth from the water surface to the bottom, set the
offset equal to the vertical distance between the transducer and
the water surface,
B
(positive value)
• For depth below transducer, set the offset to 0.
Installation
Use this dialog to setup and configure available sources.
Source
Select this option to display a list of sources available for setup. The
settings you make in the rest of the dialog pertain to the source
selected.
40
System setup | Vulcan Series Installation Manual