B&G RAM T1, Руководство пользователя

Страница: 10 / 20

10
LOCATION
The RAM T1 & T2 Actuators are designed for under-deck installations only.
When considering where to mount the actuator the following points should
be taken into account.
: Keep cable runs short
: Mount away from sources of heat
: Install the actuator above areas liable to flooding.
: Use a solid surface, capable of supporting the large thrusts generated by
this unit.
: Ensure that piston movement is limited by the rudder hard stops and not
by the actuator end stops.
: Allow sufficient clearance for removal of the mounting pin. (See page 17)
: Check that no part of the actuator fouls the vessel or rudder quadrant
throughout its full range of movement.
: Keep the area in which it is mounted clear of equipment and obstructions.
: Maintain access to the quick release tab at all times and ensure that it is
not liable to entanglement.