16
1. Press
SETUP
until a flashing
t
and either
r
or
t
is displayed.
2. Press
ENTER,
r
or
t
will flash.
3. Press the
▲
or
▼
keys to switch the setting between repeater (
r
) and
transducer (
t
).
4. Press
ENTER
to accept the setting and return to set-up mode.
5. Press
MODE
to return to desired mode.
Unit set to repeater mode Unit set to transducer mode
Remember that a compass offset may be entered (see section SETTING THE
COMPASS OFFSET).
1. Press
SETUP
until the rotating segment is displayed.
2. Press
ENTER
to begin calibration swing. The display shows a degree count.
3. Sail the vessel through a full circle, the display will count up to 360.
4. On completion the compass will display a
-P-
for pass or a
-F-
for fail (see
troubleshooting).
5. Press
ENTER
to accept the calibration, the rotating segment will reappear.
6. Press
MODE
to return to desired mode.
When the display shows a clockwise rotating segment press
ENTER
and turn the boat through a full circle
SELECTING THE DISPLAY MODE
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
CALIBRATING THE COMPASS
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
