14
The compass offset compensates for fixed errors in the compass after
installation and calibration such as sensor orientation.
1. Press
SETUP
until a bearing is displayed and the degrees sign is flashing.
2. Press
ENTER,
the numbers will flash.
3. Press the
▲
or
▼
keys until the desired value is shown (b180 and
-180 seconds). A positive offset has a bar graph on the right of the display,
a negative offset has a bar graph on the left of the display
4. Press
ENTER
to accept value and return to set-up mode.
5. Press
MODE
to return to desired mode.
Compass Offset at -3
°
Compass Offset at +7
°
1. Press
SETUP
until
Uxx
is displayed (xx represents a number) and the U is
flashing.
2. Press
ENTER,
the numbers will flash.
3. Press the
▲
or
▼
keys until the desired value is shown (between 90W and
90E). An easterly variation has a bar graph on the right of the display, a
westerly variation has a bar graph on the left of the display.
4. Press
ENTER
to accept value and return to set-up mode.
5. Press
MODE
to return to desired mode.
Variation is 5
°
E Variation is 7
°
W
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
SETTING THE VARIATION
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
