B&G CND Скачать руководство пользователя

Страница: 60 / 60

warranty

cnd

Page 60

03/09/01

warranty

6. Software

B&G shall not be liable under this Warranty or otherwise for any defect in software incorporated
within the product.

7. Further

Warranties

The warranty set out in this document is the only warranty offered by B&G. B&G makes no further
promises in relation to this product such as (but not limited to):

7.1. That it is suitable for any particular use; or

7.2. That it conforms to any particular quality standards.

8. Transfer

This Warranty is not transferable.

9. Consequential

Loss

B&G shall not be liable for any damage to persons, yachts, equipment or any other property or for
any other kind of consequential loss.

10. Governing Law

This document is governed by and shall be construed in accordance with English law.

11. Statuary Rights

This Warranty is offered as an extra benefit and does not affect your statutory rights against the
party who sold you the product.

Содержание CND





























































Результаты поиска

Содержание CND

Отзывы:

Похожие инструкции для CND

Бренды по названию

Популярные бренды

B&G CND, Руководство пользователя

Результаты поиска

Содержание CND

Отзывы:

Похожие инструкции для CND

Бренды по названию

Популярные бренды