NETWORK COMPASS USER MANUAL
SETTING THE TIMER
1. Press
TIMER
to enter timer mode.
2. Press
SETUP
to give the display
h:xx
(
xx
represents a two digit number) the
h
will be
flashing.
3. Press
ENTER
and the numbers will flash.
4. Alter the hours using the or keys. If the key is held down the numbers will change
more quickly.
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
30
20
10
30
20
10
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
5. Press
ENTER
to adjust the count down minutes. The display will show the current
minutes setting and the bar graph on the left will represent the minutes before time
zero (up to 30 minutes).
6. Alter the minutes using the or keys.
7. Press
ENTER
to set the timer, with the seconds set to zero. Both sides of the bar
graph will now be full to show that the timer is ready to be started.
8. Press
ENTER
to start the timer and exit to the timer display.
ENABLING/DISABLING THE TIMER BEEPS
1. Press
TIMER
to enter timer mode.
2. Press
SETUP
to give the display
h:xx
(
xx
represents a two digit number) the
h
will be
flashing.
3. Press
SETUP
to give the
O:FF
or
:on
display (colon flashing).
4. Press
ENTER
. The
O:FF
or
:on
will flash.
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
5. Press or keys to select
:on
or
O:FF
, enabling or disabling the beeps.
6. Press
ENTER
to store the new setting.
7. Press
SETUP
to return the unit to the timer setup display.
8. Press
MODE
or
TIMER
to return to the desired mode.
13
